Get A Quote – zerofivemm.com


  
    Advanced DFM review
    Before proceeding, please read and agree to the following:
    
      Your STL file will be reviewed and modified by an engineer to optimise it for printing
      A modified file will be sent to you for approval — printing will not begin until you approve
      All geometries marked as preserved in your technical drawing will be respected
      If issues require resubmission, lead times will increase accordingly
      A technical drawing must be uploaded at checkout, or you must confirm in order notes that your design has no preserved geometries
    
    Important: Without a technical drawing, 0.05mm reserves the right to modify your design as needed to achieve a successful print.
    By clicking "I understand, proceed" you confirm you have read, understood, and agreed to all of the above requirements.


  pricing calculator
  Build your quote.
  Upload your STL file for automatic volume and price detection. All prices update live. Charged on actual material used.


        
          configure your part

          
          
            Upload STL files (multiple supported — auto-arranged on bed)
            
              
              Drop STL files here or click to browse
              Max build volume per part: 180 × 180 × 180 mm *
            
            
            
            
            * Parts exceeding 180×180×180mm require our Advanced DFM tier — we'll split and optimise the body for you. You can also split it yourself before uploading.
          


          
          
            Material
            
              
              
            
          

          
          
            Colour — no price difference
            
              
              
              
            
            Availability subject to stock. We'll contact you if your chosen colour is unavailable.
          

          
          
            Infill density
            
              
              
              
              
              
              
              
              
            
            
              Custom:
              
              15%
            
            15% = visual prototype · 40% = general purpose · 80%+ = structural
          

          
          
            Layer height
            
              
              
              
              
              
            
            0.28mm is the default — fast and clean for most engineering parts. Lower layer heights increase print time significantly.
          

          
          
            Part size — auto-selected from dimensions
            
              
              
              
            
          

          
          
            DFM review tier
            
              
              
              
            
          

          
          
            The default settings produce high quality results for the vast majority of engineering prints. Only change these if you have a specific requirement.
            
            
              
                Support type
                
                  
                  
                  
                
              
              
                Brim width
                
                  
                  
                  
                
              
              
                Wall thickness *
                
                  
                  
                  
                  
                  
                
              
              
                Seam position
                
                  
                  
                  
                
              
              
                Print speed
                
                  
                  
                
              
            
            * Wall thickness applies uniformly to all sides including top and bottom.


          
            your live quote
            
              MaterialPLA
              ColourWhite
              Infill15%
              Layer height0.28mm
              Components—
              Part cost—
              Layer height surchargeincluded
              Size surchargeincluded
              DFM reviewincluded
              £8 handling added once at checkoutper order
            
            
              
                estimated total
                —
              
              Shipping calculated at checkout
            
            
              vs. typical UK FDM bureau
              Bureau estimate—
              You save approx.—
              Saving is on print cost. DFM review is typically charged separately elsewhere.
            
            
              ✓ Added to basket